No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Butik
There are 386 products.-
-
-
26716Magnetic Spring Steel Build Surface for Anycubic Vyper.
42,29 EUR0 Bedømmelser -
26725Magnetic Spring Steel Build Surface for Anycubic Vyper
6,04 EUR0 Bedømmelser -
-12,08 EUR
26748Fan that cools the motherboard on Biqu B1
29,27 EUR 41,35 EUR0 Bedømmelser -
26888BLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
70,49 EUR0 Bedømmelser -
27093New innovative nFEP film No more problems with sticking resins Smoother than traditional FEP High Quality and light admittance
25,11 EUR0 Bedømmelser -
270945-Pack of high quality PrimaCreator FEP film sheets.PrimaCreator FEP film sheets are made of high quality material to ensure high light transmittance and good reliability. To protect the sheets from wrinkles and scratches, each sheet comes with a protective film on both sides and are packaged in a protective envelope.The sheets fits most 3D-printers using...
31,28 EUR0 Bedømmelser -
271120,4 mm Brass Nozzle for Anycubic Vyper
30,21 EUR0 Bedømmelser -
27378Anycubic Photon Mono X FEP Film 1 sheet in the package
13,29 EUR0 Bedømmelser -
27470Creality 3D Pen is simple to operating, as you don't have to worry about pressing a bunch of buttons. Will automatically retract the filament back, after there is no action for 10 minutes. Uses PCL filament, which prints at a low temperature, making it safer for kids. Pen is made of durable ABS plastic, making it non-toxic and drop resistant. Perfect...
10,20 EUR0 Bedømmelser -
27611Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE)
17,19 EUR0 Bedømmelser -
29132SUNLU 3D pen filaments are bright and perfect for 3D pen doodling. This filament pack contains a total of 20 colors, giving you room for your creativity. Very easy to use Non-Toxic 20 Colors
13,96 EUR0 Bedømmelser -
30186M2 + M3 + M4 + M5 Thread Inserts for your 3D printing parts. The ruthex threaded nuts can be subsequently inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press-in nuts are simply embedded into a blind or through hole.
30,88 EUR0 Bedømmelser -
30896Panda Build Plate Double Sided Spring Steel Sheet - Textured PEI x Smooth PEI For Bambu Lab P1P / P1S / X1C / A1
21,35 EUR0 Bedømmelser -
30897Panda Build Plate Double Sided Spring Steel Sheet - Textured PEI x Smooth PEO For Bambu Lab P1P / P1S / X1C / A1
21,35 EUR0 Bedømmelser -
30898Panda Build Plate Double Sided Spring Steel Sheet - Textured PEI x Smooth PET For Bambu Lab P1P / P1S / X1C / A1
21,35 EUR0 Bedømmelser -
30899Panda Build Plate Double Sided Spring Steel Sheet - Textured PEI For Bambu Lab P1P / P1S / X1C / A1
21,35 EUR0 Bedømmelser -
-
33001SoluNOiD's own brand - Premium Filament properties Produced in Europe Tolerance på +/- 0.05mm Good bonding to various build materials such as: ABS, ASA, PLA, PET, PA, PC and TPU Excellent water solubility. Higher solubility than PVA Easy to print at low temperature Helps you by printing specific, complex models Light-and UV-sensitive
70,49 EUR0 Bedømmelser -
40-001The Silicone Sock for Hotend is made from high-quality silicone
8,59 EUR0 Bedømmelser -
40-002The Thermistor for Hotend has highly accurate temperature measurement
8,59 EUR0 Bedømmelser -
40-003Perfect for every day use when a textured surface finish is needed
44,98 EUR0 Bedømmelser -
40-004The Bambu Cool Plate is comprised of a Bambu Engineering Magnetic Flex Plate with a Cool Plate sticker pre-installed
44,98 EUR0 Bedømmelser -
40-005The Bambu Cool Plate is comprised of a Bambu Engineering Magnetic Flex Plate with a Cool Plate sticker pre-installed
40,01 EUR0 Bedømmelser -
40-007A Bambu glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free.
7,38 EUR0 Bedømmelser -
40-008Prolonging the lifetime of the build plate is to use a sharp scraper for releasing the model from the printing surface. After the plate has cooled down, gently slide the scraper underneath one of the corners of the model then carefully bend the sheet to remove the model.
7,38 EUR0 Bedømmelser -
40-009Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs
10,07 EUR0 Bedømmelser -
40-010The filament can be cut to prevent the supplies from clogging when using Bambu X1or X1 Carbon. When used with AMS, it assists with multi-material switching.
7,38 EUR0 Bedømmelser -
40-011The Bambu Lab Auxiliary Part Cooling Fan is made from high-quality material for minimal vibration. It can aid auxiliary heat dissipation and work with front housing assembly together to achieve high-speed printing.
39,74 EUR0 Bedømmelser -
40-012The cooling fan is used for cooling and reducing the temperature of the ceramic heater for hotend.
15,44 EUR0 Bedømmelser -
40-013The function of the front housing assembly is mainly to cool the printed part so that it can be shaped.
23,50 EUR0 Bedømmelser -
40-014The chamber camera is included by default in the X1-Carbon and is an optional upgrade that you can install for the X1
65,12 EUR0 Bedømmelser -
40-015The control board fan is used to cool the control board to prevent the control board from overheating and shutting down.
15,44 EUR0 Bedømmelser -
40-016Chamber temperature regulator fan is used to control the temperature, as well as helping to filter air inside the chassis.
24,84 EUR0 Bedømmelser -
40-017The Filament buffer is an accessory that is required in conjunction with a single AMS unit
39,07 EUR0 Bedømmelser -
40-018The function of PTFE is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its outer diameter is 4mm.
7,38 EUR0 Bedømmelser -
40-019Bambu AMS Driving Sleeve Unit is a roller for supporting the filament spool and also for actively driving the spool to roll.
10,61 EUR0 Bedømmelser -
40-020Bambu AMS Driving Sleeve Unit is a roller for supporting the filament spool and also for actively driving the spool to roll.
9,40 EUR0 Bedømmelser -
40-021Bambu AMS Driving Sleeve Unit is a roller for supporting the filament spool and also for actively driving the spool to roll.
66,46 EUR0 Bedømmelser -
40-022Bambu AMS Filament Hub Extruder Driving Wheel is a friction wheel assembly for actively driving the filament forward.
18,66 EUR0 Bedømmelser -
40-024The AMS Hub is used to expand the number of AMS connected to Bambu X1 series printers from 1 (4 channels)
66,46 EUR0 Bedømmelser -
40-025The function of the front housing assembly is mainly to cool the printed part so that it can be shaped.
28,19 EUR0 Bedømmelser -
40-026These rubber feet are designed to decouple the Bambu Lab P1P from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations.
18,12 EUR0 Bedømmelser -
40-027The Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate. Compatiblity: X1 Series, P1P
18,12 EUR0 Bedømmelser -
40-028The display connect flex cable is used to connect the motherboard and high-resolution screen. Its function is to transmit SD card data and display images between the screen and printer. Fits: Only X1 Series
18,12 EUR0 Bedømmelser -
40-029The front door mounting kit is used to connect the front door glass to the printer. Fits: X1 Series only
23,50 EUR0 Bedømmelser -
40-030The function of the XY belt is to transmit the motion of the motor to the tool head with high precisi. Fits: X1 Series, P1P
18,12 EUR0 Bedømmelser -
40-031The function of the Z belt is to transmit the motion of the Z motor to the three Z-axis lead screws. Fits: X1 Series, P1P
9,40 EUR0 Bedømmelser -
40-032Reusable spool for Bambu Lab filament Used together with refill filament can be separated into 2 parts Use primarily for PLA (Especially in connection with drying filament) Withstands up to 70 degrees celsius Weight 250g
18,80 EUR0 Bedømmelser -
40-033Bambu Lab Textured PEI Plate Provides strong adhesion and effortless print removal, for a superior printing experience Excellent first-layer adhesion Improved durability Compatibility with various filaments Suitable for: Bambu Lab X1 Series & P1 Series printers
53,03 EUR0 Bedømmelser -
40-034The ceramic heater can heat the nozzle up to 300℃, which is for use with Bambu Lab complete hotend assemby only.
23,50 EUR0 Bedømmelser -
40-035LED Board for lighting lithographs printed with CMYK filament Connects to USB-C Adapter 156x120mm Avoid placing the plate on a metal surface when connecting
20,00 EUR0 Bedømmelser -
40-038Bambu Lab Automatic Material System Multi color and material unit Can hold 4 rolls Compatible with the X1 and P1 series Keeps the filament dry Filament Runout & Winding Detection If you need more than 1 AMS unit, you must purchase an AMS hub
396,06 EUR0 Bedømmelser -
40-040Liquid glue for build plates Can be used for PLA / ABS / PETG Can be used on the X1 and P1 series
23,50 EUR0 Bedømmelser -
40-041Nozzle wiper, to clean waste filament on the nozzle Compatible to X1 og P1 series Package Includes 3 pcs.
6,58 EUR0 Bedømmelser -
40-042Bambu Lab Textured PEI Sheet for Bambu Lab A1 Mini Excellent first-layer adhesion Texture surface finish Compatible with various filament materials
31,55 EUR0 Bedømmelser -
40-043Extruder Interface Board V9 is the part of the tool head board where the print head wires are connected. It's also connected to the main TH board V9 and it's only compatible with V9 version of the TH board.
15,44 EUR0 Bedømmelser -
40-044Bambu Lab Textured PEI Sheet for Bambu Lab A1 Mini Excellent first-layer adhesion Smooth surface finish Compatible with various filament materials
33,56 EUR0 Bedømmelser -
40-045Bambu Lab Textured PEI Sheet for Bambu Lab X1 Series / P1 Series / A1 Excellent first-layer adhesion Smooth surface finish Compatible with various filament materials
53,03 EUR0 Bedømmelser