Wet 3D printing filament can cause all sorts of issues. In fact, many of the issues that hotends or nozzles get blamed for can actually be traced back to filament that has absorbed too much moisture
It's time to unlock the full power of your Raise3D E2, with the ubiquitous Copperhead®. We've built a reputation for outfitting 3D printers with premium engineering-grade components that drastically improve performance. The result is less downtime, less wasted filament on failed prints, less tinkering, increased throughput, and higher resolution.
It's time to unlock the full power of your Raise3D Pro2, with the ubiquitous Copperhead®. We've built a reputation for outfitting 3D printers with premium engineering-grade components that drastically improve performance. The result is less downtime, less wasted filament on failed prints, less tinkering, increased throughput, and higher resolution.
The Complete Hotend Assembly with Hardened Steel Nozzle - X1 Series is specially designed for the Bambu Lab X1 Series 3D Printers.
Nozzle X from E3D's V6 line-up is recommended for printing abrasive materials and at high temperatures, which cause the standard brass nozzle to wear out very quickly.
The Mosquito Hotend® is the next step in the evolution of hotend technology. With incredible heat break performance, high temperature rating, low mass, and the famous one-handed nozzle change™, it is the ideal engineering-grade addition to your 3D printer.
Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep
Nickel-plated for superior longevity and reduced emissivity Copper alloy base material Distinctive laser marking Convenient wrench flats to simplify changing nozzles
Wet 3D printing filament can cause all sorts of issues. In fact, many of the issues that hotends or nozzles get blamed for can actually be traced back to filament that has absorbed too much moisture
Hot Block Hardware - Standard / Magnum / Liquid is used to mount the Hot Block to the Heat Sink in the Mosquito® Hotend, Mosquito® Magnum Hotend, and Mosquito® Liquid Hotend
Need to replace your heat break? We’ve got you covered, with the Bimetallic Heat Break™ from Slice Engineering.
Got a sticky nozzle? Sick of plastic sticking to it all the time? Plastic Repellent Paint™ by Slice Engineering® is the solution for you!
Thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste...
Specifically designed for changing nozzles 1.5 Nm torque provides correct seal to prevent leaking plastic Perfect tool for one-handed nozzle change when paired with Mosquito® hotends Fits any Slice Engineering nozzles natively, with just enough wiggle room for that baked on plastic Fits other style nozzles with off-the-shelf adapters