0
Product:
Products:
(empty)
No products
To be determined
Shipping
0,00 EUR
Tax
0,00 EUR
Total
Prices are tax included
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
(tax incl.)
Total shipping (tax incl.)
To be determined
Tax:
0,00 EUR
Total
(tax incl.)
The Bambu Cool Plate is comprised of a Bambu Engineering Magnetic Flex Plate with a Cool Plate sticker pre-installed
Out of stock
40-005
Få besked når varen er på lager
Skriv din e-mail-adresse her, hvis du vil have besked når vi igen har denne vare på lager:
Notify me when available
Write your review
Overview:
The Bambu High-Temperature Plate is a sticker that has been applied to the Bambu Engineering Flex Plate. When the sticker is consumed you can replace the sticker with a new High Temp or cool sticker. This is a consumable printing surface that is used in conjunction with a thin coat of glue stick and works well with most common filaments.
The Bambu High-Temperature Plate leaves a smooth finish to the model that comes in contact with the High-Temperature Plate, and might require a bit of post-processing for cleaning up the glue stick.
Recommended settings for Bambu High-Temperature Plate
These are some recommendations for settings to get the best results while using the Bambu High-Temperature Plate. Please note that these settings are just a recommendation, and other slicer settings might need to be adjusted based on the printed model and the filament requirements.
|
Material
|
Hotbed temperature
|
Glue Stick Required?
|
Upper Glass Cover Plate Removed?
|
|
PLA
|
45℃~60℃
|
Recommended
|
Yes
|
|
ABS
|
90℃~100℃
|
Recommended
|
No
|
|
PETG
|
80℃
|
Yes
|
Yes
|
|
TPU
|
35℃
|
Recommended
|
Yes
|
|
ASA
|
90℃~100℃
|
Recommended
|
No
|
|
PVA
|
45℃~60℃
|
Recommended
|
Yes
|
|
PLA CF
|
45℃~60℃
|
Recommended
|
Yes
|
|
PLA GF
|
45℃~60℃
|
Recommended
|
Yes
|
|
PC
|
100℃~110℃
|
Yes
|
No
|
|
PA
|
100℃~110℃
|
Yes
|
No
|
|
PA CF
|
100℃~110℃
|
Yes
|
No
|
Recommended settings for Bambu Engineering Plate
These are some recommendations for settings to get the best results while using the Bambu Engineering Plate. Please note that these settings are just a recommendation, and other slicer settings might need to be adjusted based on the printed model and the filament requirements.
|
Material
|
Hotbed temperature
|
Glue Stick Required?
|
Upper Glass Cover Plate Removed?
|
|
TPU
|
30℃~35℃
|
Recommended
|
No
|
|
PC
|
100℃~110℃
|
Yes
|
No
|
|
PA
|
100℃-120℃
|
Yes
|
No
|
|
PA CF
|
100℃~120℃
|
Yes
|
No
|
The Bambu High-Temperature Plate is a sticker applied on the flexible magnetic build plate that can support a square area of 256*256mm with rounded corners. It is suitable for all Bambu 3D Printer models.
Benefits of using the Bambu High-Temperature Plate
-
Works best with most 3D printing filaments
-
Works well with the Automatic Calibration for Flow rate and does not interfere with the LIDAR
-
Smooth texture on the surface of the print
-
Excellent adhesion and easy print removal
-
Can be replaced by the user
Downsides to using the Bambu High-Temperature Plate
-
It cannot be used without heating the printing surface
-
Can be more fragile compared to the Engineering Plate
-
The upper glass cover plate, and the front glass door need to be opened for filaments with a low glass transition temperature.
Considerations for using the Bambu High-Temperature Plate
-
It is recommended to apply a uniform thin coat of glue stick, to ensure a longer lifetime for the Cool Plate, especially for filaments like PETG, TPU and PC
-
Regularly clean the print surface with dish soap and hot water to eliminate any dust or grease residue, which might cause bad adhesion.
-
Do not clean the High-Temperature Plate with Acetone, as it might damage the surface.
-
Always wait for a few minutes before removing printed models to allow them to cool down for easy print removal and avoid bubbles forming underneath the printing surface.
Installation steps
When installing the Bambu High-Temperature Plate, please use the location of the text to help you install the plate in the correct orientation. The upper left and right rounded corners of the High-Temperature Plate should be aligned with the left and right fixed points of the heating platform, and gently lowered to be secured by the magnet.
| Spare Parts Category | PRINT SURFACE |
